All hobbies › Stained Glass
Stained Glass ステンドグラス
A hobby where you cut colored glass, arrange it, join it with lead or solder, and make works that let light pass through.
- Cost
- From ¥20,000; ¥100,000 if you get serious
- Time
- 2–3 hours per class session
- First step
- Make a small coaster at a trial class
Why people love stained glass
When window light shines on red glass, a red shadow falls on the floor. The fun of stained glass is that what you made changes the color of light. The "crack" sound when you score with a glass cutter and break it lightly. Smoothing the cut surfaces with a grinder, applying copper foil tape, and running solder. When the finished piece glows in a window, all the hours of effort it took are rewarded. Thinking up the design is fun too. In the slanting light of evening, the time when shadows of unusual colors stretch across the room is special.
How to start
- Look up stained glass trial classes
- Check what to bring, such as safety glasses, and book
- At the class, cut colored glass and make one coaster
What you need
- Must have: A glass cutter, a grinder, copper foil tape, a soldering iron, safety glasses
- Nice to have: Glass color samples, a heat-resistant work mat, a ventilation fan
- Not needed at first: A large window panel from the start
From beginner to advanced
- BeginnerClasses ¥2,000–¥5,000 per session
Next challenge: Glass edges chip or crack
- IntermediateA full tool set ¥30,000–¥100,000
Next challenge: Solder beads do not come out even
- AdvancedFrom ¥100,000
Next challenge: Designing and transporting large panels is difficult
Tips
- Start by choosing a small pattern that can be made with only straight lines, so you can concentrate on how to cut glass. Complex curves can wait until you are used to it.
- Lay the cut glass on top of the design drawing to check before sticking it. You can fix misalignments early, so the finish is cleaner.
- Each time, wipe up glass dust from the workbench and tidy up. It prevents dust from getting in your hands or eyes and makes your tools last longer.
FAQ
Isn't it dangerous?
You can cut your hands on glass edges or burn yourself on the soldering iron. Always prepare safety glasses, gloves, and ventilation.
Should I go to a class first?
It is reassuring to go. Learning how to cut glass and handle solder directly from a teacher helps you improve faster.
How much do the tools cost?
Buying a set for home costs about ¥30,000–¥100,000. At a class you can borrow tools and start from a few thousand yen.
How old do you have to be?
You use blades and heat, so junior high school age and up is a guide. Elementary school students should try it with an adult watching.
Is solder bad for the body?
Lead-free solder is sold nowadays. Ventilate well and wash your hands after working.
Similar hobbies
Costs and steps are typical examples in Japan and can vary. 日本語のページ